Electrical Power Line Transformer Manufacturers – Line Duty Transformer Supply
Subian Electric manufactures electrical power line transformers – pole-mounted and distribution units that hang on the network – at its 50,000-square-metre factory in Xuzhou, Jiangsu, China. Subian’s 350+ employees have served utilities in 50+ countries since 2019.
As a factory-direct manufacturer and supplier, Subian provides power line transformers with factory pricing, custom ratings and complete test documentation.
Send your line voltage, capacity and mounting requirements. Subian’s export team will respond with a quotation.


Power Line Transformers Manufactured by Subian
Pole-mounted and distribution transformers for overhead line duty – single-phase and three-phase units from 5 kVA to 2500 kVA, tested per IEC 60076.
What Is an Electrical Power Line Transformer?
A power line transformer connects to overhead distribution lines and steps voltage down for local supply. It is built for outdoor, all-weather duty with line and pole mounting in mind.
Utilities specify line transformers for rural, suburban and urban overhead networks – compact units that are easy to install, maintain and replace.


What Buyers Check Before Ordering
- Overhead line duty – built for outdoor, all-weather operation.
- Pole mounted – single and three-phase pole units.
- 5 kVA – 2500 kVA – capacity range for line distribution.
- 50,000m² factory – in-house winding, vacuum drying and testing.
- 350+ employees – engineering, quality and export teams.
- OEM / ODM & wholesale – custom branding, packaging and volume supply.
Main Types of Power Line Transformers
Subian manufactures three line transformer types:

Single-phase pole mounted
Pole-mounted
Compact units for rural and single-phase networks.
CSP or conventional tank / 5-500 kVA

Three-phase pole mounted
Pole-mounted
Units for small three-phase distribution.
CSP or conventional tank / 5-500 kVA

Pad mounted
Pad-mounted
Ground-level units for urban and commercial lines.
Dead-front or live-front / loop feed
Power Line Transformer Specifications
| Parameter | Specification |
|---|---|
| Rated voltage | 6 kV – 132 kV class |
| Rated capacity | 5 kVA – 2500 kVA |
| Mounting | Pole / pad |
| Frequency | 50/60 Hz |
| Cooling | ONAN |
| Standard | IEC 60076 / GB 1094 |
How to Compare Electrical Power Line Transformer Suppliers
Quotations for this equipment often look identical on the first page. The difference sits in what is attached behind the number, and in the three or four lines that decide the installed cost rather than the purchase price.
| What to compare | What a thin quotation leaves out | What to ask for |
|---|---|---|
| Price basis | One figure, no Incoterm | Ex-works, FOB or CIF, and which port |
| Payment terms | A deposit with no security | T/T split, LC at sight or LC 90 days, and the bank |
| Lead time | Weeks counted from the order | Days from drawing approval, with the approval date named |
| Scope of accessories | Core and coils only | Bushings, tap changer, surge arresters, terminal box and oil charge |
| Test witness | A report sent after shipment | FAT date agreed at approval, with the witness named |
| Warranty | A period with no remedy defined | Duration, what is covered, and who pays freight on a claim |
Buyers who compare on price alone usually discover the gap at commissioning. The six lines above are the ones that decide whether the unit or the panel can be energised without site work. OEM and ODM supply is available where the nameplate, manual and packing have to carry a different brand.
Where These Units Ship
Equipment of this class is usually bought in small batches, tested at the factory and shipped as one consignment. Three references show how buyers in different markets specify it.
| Project | Location | Application | Supply model |
|---|---|---|---|
| Pad-mounted units for a solar station | Ecuador | Photovoltaic generation | Direct export |
| Utility distribution transformer supply | Venezuela | Utility distribution | Direct export |
| 33kV main transformer ODM project | Zimbabwe | Mining | ODM supply |
Scope, packing and delivery notes for each project are in the project case library. Send the single-line diagram and the destination port and the reply follows the same structure.
Power Line Transformer Manufacturing at Subian’s 50,000 m² Factory
From winding to vacuum drying, oil filling, assembly and testing – every line transformer is built and tested at Subian’s Xuzhou facility.
Production Workshop
Controlled winding, core processing and vacuum drying with quality checkpoints between every stage, so quality is built in from the start.
Learn More →
Quality & Testing Center
Routine inspection on every unit before delivery, with type test reports supporting project approval and market certification.
Learn More →
Materials & Components
Core materials, windings and components are checked against the approved bill of materials on every production run.
Learn More →
OEM / ODM / Agency Supply
Custom branding, packaging and configurations for global partners – from nameplate to complete product design – supported by a dedicated export team.
Learn More →OEM/ODM & Wholesale Power Line Transformer Supply
Utilities and distributors can brand or resell line transformers with custom nameplates and documentation.
OEM / ODM
Factory-DirectCustom branding, packaging and product variants built on Subian’s standard platforms – from a nameplate to full product design.
Custom nameplate · Custom packaging · Full test docs
Wholesale Supply
Volume PricingFactory pricing with flexible container quantities, mixed models per container and reliable global shipping for volume buyers and importers.
Container MOQ · Mixed models · Global shipping
Distributor Support
Channel PartnersDedicated account management, technical documentation and priority production for distributors and project clients.
Account manager · Sales material · Priority lead times
Pole Mounted vs Pad Mounted Line Transformers
Pole-mounted units serve overhead networks economically; pad-mounted units sit at ground level in enclosures for urban sites without overhead space.
Subian manufactures both – the choice follows your network and site configuration.


Choosing a Power Line Transformer Manufacturer
Verify type test evidence, vacuum drying quality and utility reference deliveries – the factors that decide line transformer life.
Subian Electric offers a 50,000m² factory, 350+ employees, ISO9001, CE and UL certification and export to 50+ countries.
Send your line voltage and capacity – Subian confirms the design before production.
Certifications & Quality Assurance
Subian’s power line transformers are produced under ISO9001, ISO14001 and ISO45001 management systems, with CE and UL certification and type test reports.
Product Certifications
Power Line Transformer FAQ
Common questions about power line transformers and factory sourcing.
What is a power line transformer?
What capacities are available?
Can you build single-phase pole transformers?
What testing is done?
Do you provide type test reports?
What are your delivery terms?
What information is needed to quote Electrical Power Line Transformer?
Do you build Electrical Power Line Transformer to a customer’s nameplate?
Contact Subian
Need the Right Specification?
Tell Subian your target market, product type, quantity and technical requirements. Subian’s team will help you identify a suitable configuration for your project.






10 kV Dry-Type Transformer Certificate
35 kV Transformer CB Certificate
35 kV Transformer CE Verification
Transformer CE Certificate
Dry-Type Transformer Test Verification
ISO 14001 Environmental Management
ISO 45001 Health & Safety
ISO 9001 Quality Management
110 kV Transformer Type Test Report
UL Certificate of Compliance